Examples of impressive Allplan Bimplus projects around the world.
Hotel complex Costabella
The Costabella hotel complex currently under construction near Opatija in Croatia was modeled in 3D due to complicated foundation conditions and the need to solve the construction and technologies in their entirety.
The resort is founded on terrain sloping down towards the Adriatic Sea. It consists of a main building and four villas. The outdoor pool is an independent structure and is connected to other parts of the hotel complex by an elevator and a staircase, which provides easy access from the hotel down to sea level. The hotel building has four basement floors and six upper floors. On the lowest floor, a fitness studio is available to guests. One floor above is a wellness centre with associated technical utility rooms and a parking area. Further parking spaces are located on the second basement level, which contains an indoor pool and a fee-paying parking garage. The first basement level houses the hotel‘s catering area with restaurant, kitchen and lounges.Hotel guests enter the hotel via a hotel lobby with reception on the first floor level. The next four floors are exclusively for the accommodation of guests with a total capacity of 132 rooms. On the top floor there is an accommodation unit and a restaurant with a roof terrace.
Digital workflow on a mega project
Stuttgart 21 as a part of the Stuttgart-Ulm rail project is one of the largest European infrastructure projects. Within the whole project, five new stations, about 120 kilometers of new railways and two new quarters are being built. But it‘s not just the size that makes this project so impressive. In addition, engineering history is being written here, both in terms of design and technology. Special attention will be paid to the station concourse of the new underground through-station in Stuttgart, designed by ingenhoven architects.
An architecturally highly sophisticated shell roof, supported by 28 geometrically highly complex chalice-shaped columns, qualifies this as a masterpiece of modern architecture that the world has never seen before. Without the use of powerful BIM software and production processes specially developed for the project, the implementation of the building would be impossible. The engineering firm Werner Sobek AG, which was responsible for the structural, shell and reinforcement design of the underground through-station concourse, therefore relied largely on 3D for the design.
Case Study Package Allplan Bimplus -
Get four interesting Case Studies in one package
See from the customer's point of view how Allplan Bimplus was used in different challenging BIM projects - from an office and residential building to a hospital to a biomass reception and treatment plant - has significantly supported interdisciplinary cooperation. Those Case Studies describe specific challenges and problems that were successfully solved with the help of the cloud-based openBIM platform Allplan Bimplus.
Your advantages at a glance:
- Detailed description of the projects challenges incl. solution approach
- Case Studies available in pdf format
- Exclusive insights into customers approach to BIM projects using Allplan Bimplus
Find out how Allplan Bimplus convinced our customers
Comprehensive web-based coordination
Project: Cantonal Hospital St. Gallen, Allplan Bimplus
The Cantonal Hospital St. Gallen is being expanded. This affects several buildings. The entire project has a total construction cost of 587 million Swiss francs. The expansion will be built in two different planning and construction phases. ...
“We did not have a contractual requirement from the client to plan this project with BIM,” says Andreas Haffter, project manager and BIM manager of WaltGalmarini AG, “but due to the size and complexity of the project, this was obvious to us; also because quality assurance was important to us and we wanted to document the model comparisons.” ...
WaltGalmarini AG gained its first experience of using this openBIM solution with the “Haus 10” at the Cantonal Hospital of St. Gallen. “We executed the tasks, made cuts, wrote comments and the tree structure within the individual models and building structure was helpful for us. ...
Bespoke and innovative Building
Project: ristav CUBE, Karlsruhe area, Germany
The construction project “ristav CUBE” is a classic example of a project with customer-specific features. Construction began in 2017 and the planned completion date is summer 2018. ristav GmbH is a medium-sized company from the Karlsruhe area, which has a plot in the newly developed Karlsruhe industrial park, Kirchfeld-Nord. They were planning the new office and residential building here and commissioned the Vollack Group to design it. ...
The first challenge was to create space for the files as well as sufficient office space. Secondly, the focus of the development process was about optimizing the working environment, by linking work processes and creating short travel distances within the building. In addition, the project’s energy goals and the pre-defined working method Building Information Modeling (BIM) played a major role for Vollack. ...
To be able to take such aspects into consideration in detail, the architects and engineers at Vollack use the software from ALLPLAN during the design phase, and in certain cases, even adapt it for individual needs. 3D models are created at Vollack with Allplan using their own CAD component library and are enhanced with smart data. ...
Biomass receiving and treatment plant
Biomass receiving and treatment plant “Ara Region Bern AG”
“Ara Region Bern AG” is one of the largest wastewater treatment plants in Switzerland. With the construction of a new receiving and treatment plant for biomass on the site of the former sludge drying plant, “Ara Region Bern AG” will be able to increase the future production of biogas by around 25 percent. ...
“On the one hand, we had to align the new building with the structures present on the existing foundation walls, but on the other hand, we had to coordinate the operational requirements with the entire receiving area as well as the process technology for treating the biomass,” says project manager Hans Peter Bütikofer from “ingenta ag ingenieure + planer” as he describes the challenges. ...
"We use Allplan Engineering to develop 3D models and exchange data in BIM projects. We also use the openBIM solution Allplan Bimplus, says Andreas Liesen, referring to the current uses. For the new building of the biomass receiving and treatment plant, ingenta submitted a proposal to the client to 3 implement this construction project as a BIM project. ...