FRILO Concept
FUNCTIONS
Concrete
Reinforced Concrete Half Joint (B10+)
no
Crack Width Verification (B11)
no
Verification Reinforced Concrete Cross-Section (B2+)
no
Polygonal Design and Temperature Analysis for B2 (B2-POLY/TA)
no
Reinforced Concrete Column (B5+)
yes
Temperature Design for B5+ (B5-HSB)
yes
High-Strength Steel for B5+ (B5-SAS)
yes
Punching Shear Analysis (B6+)
no
Flight of Stairs (B7+)
no
Prestressed Reinforced Concrete Girder (B8+)
no
Reinforced Concrete Corbel (B9+)
no
Slope Failure Analysis (BBR+)
no
Flush Beam (BDU+)
no
Strut-and-Tie Model Reinforced Concrete (BSM+)
no
Continuous Beam Reinforced Concrete (BTM+)
yes
Biaxial-Bending for BTM+ (BTM-2)
yes
Reinforcement layout for BTM+ (BTM-BEW)
yes
Continuous Plates IAW Piper/Martens (PL5)
yes
Slabs by Finite Elements (PLT)
yes
Cross-Sectional Properties (Q2)
no
Walls by Finite Elements (SCN)
no
Steel
Antenna Mast Design (ATB+)
no
Lateral Torsional Buckling Analysis (BTII+)
no
Buckling Analysis (PLII+)
no
Steel Cross-Sections (QS+)
no
Portal Frame (S7+)
no
Steel Chimney Design (S8+)
no
Steel Chimney braced with ropes (S8-S)
no
Steel Connections (SC+)
no
Fin Plate (SFB+)
no
Splice Connection (SLS+)
no
Butt Plate Joint (SPS+)
no
Verification Steel Cross-Section (SQN+)
no
Frame Corners Steel (SRE+)
no
Screwed Frame Corner (SRE-1 (SRE+))
no
Welded Frame corner (SRE-2 (SRE+))
no
Steel Bracing (ST12+)
no
Base Flange (ST15)
no
Steel Column Base (ST3)
no
Steel Girder Support (ST4)
no
Weld Design (ST5)
no
Pocketed Steel Column Base (ST6)
no
Continuous Beam Steel (STM+)
yes
Biaxial-Bending for STM+ (STM-2)
yes
Steel Frame (STR+)
no
Single-span Steel Column (STS+)
yes
Single-Span Steel Beam (STT+)
no
Stability Analysis for Steel (STX+)
no
Typified Steel Connections (STY+)
no
Steel Angle Connection (SWA+)
no
Timber
2D Cross Laminated Timber Design (CLT+)
yes
Timber Column (HO1+)
yes
Verification Timber Cross-Sections (HO11+)
no
Timber Construction Details (HO12+)
no
Timber Truss Joint (HO13+)
no
Single Fastener Timber Joint (HO14+)
no
Skew Notch Joint (HO2+)
no
Timber Tension Joint (HO3+)
no
Timber Frame Corner (HO6+)
no
Dovetail Connection (HSC+)
no
Continuous Beam Timber (HTM+)
yes
Biaxial-Bending for HTM+ (HTM-2)
yes
Timber Wall Diaphragms (HTW+)
no
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Framework
Framework (RSX)
yes
3D Calculation for RSX (RSX-3D)
yes
Dynamics for RSX (RSX-DY)
no
Design of Reinforced Concrete for RSX (RSX-M-B)
no
Design of Timer for RSX (RSX-M-H)
no
Design of Steel for RSX (RSX-M-S)
no
Generation of Loads with Panels for RSX (RSX-P)
yes
Stabilty Steel for RSX (RSX-ST)
no
Girder
Continuous Beam (DLT+)
yes
Trusses Timber (FWH+)
no
Trusses Steel (FWS+)
no
Mechanically Jointed Beams (HNV+)
no
Cross Laminated Timber Beams (HTB+)
no
Reinforced Timber Beam (HTV+)
no
Crane Runway Girder (S9+)
no
FRILO Professional Concrete
FUNCTIONS
Concrete
Reinforced Concrete Half Joint (B10+)
yes
Crack Width Verification (B11)
yes
Verification Reinforced Concrete Cross-Section (B2+)
yes
Polygonal Design and Temperature Analysis for B2 (B2-POLY/TA)
yes
Reinforced Concrete Column (B5+)
yes
Temperature Design for B5+ (B5-HSB)
yes
High-Strength Steel for B5+ (B5-SAS)
yes
Punching Shear Analysis (B6+)
yes
Flight of Stairs (B7+)
yes
Prestressed Reinforced Concrete Girder (B8+)
yes
Reinforced Concrete Corbel (B9+)
yes
Slope Failure Analysis (BBR+)
no
Flush Beam (BDU+)
yes
Strut-and-Tie Model Reinforced Concrete (BSM+)
yes
Continuous Beam Reinforced Concrete (BTM+)
yes
Biaxial-Bending for BTM+ (BTM-2)
yes
Reinforcement layout for BTM+ (BTM-BEW)
yes
Continuous Plates IAW Piper/Martens (PL5)
yes
Slabs by Finite Elements (PLT)
yes
Cross-Sectional Properties (Q2)
yes
Walls by Finite Elements (SCN)
yes
Steel
Antenna Mast Design (ATB+)
no
Lateral Torsional Buckling Analysis (BTII+)
no
Buckling Analysis (PLII+)
no
Steel Cross-Sections (QS+)
no
Portal Frame (S7+)
no
Steel Chimney Design (S8+)
no
Steel Chimney braced with ropes (S8-S)
no
Steel Connections (SC+)
no
Fin Plate (SFB+)
no
Splice Connection (SLS+)
no
Butt Plate Joint (SPS+)
no
Verification Steel Cross-Section (SQN+)
no
Frame Corners Steel (SRE+)
no
Screwed Frame Corner (SRE-1 (SRE+))
no
Welded Frame corner (SRE-2 (SRE+))
no
Steel Bracing (ST12+)
no
Base Flange (ST15)
no
Steel Column Base (ST3)
yes
Steel Girder Support (ST4)
no
Weld Design (ST5)
no
Pocketed Steel Column Base (ST6)
no
Continuous Beam Steel (STM+)
yes
Biaxial-Bending for STM+ (STM-2)
yes
Steel Frame (STR+)
no
Single-span Steel Column (STS+)
yes
Single-Span Steel Beam (STT+)
no
Stability Analysis for Steel (STX+)
no
Typified Steel Connections (STY+)
no
Steel Angle Connection (SWA+)
no
Timber
2D Cross Laminated Timber Design (CLT+)
yes
Timber Column (HO1+)
yes
Verification Timber Cross-Sections (HO11+)
no
Timber Construction Details (HO12+)
no
Timber Truss Joint (HO13+)
no
Single Fastener Timber Joint (HO14+)
no
Skew Notch Joint (HO2+)
no
Timber Tension Joint (HO3+)
no
Timber Frame Corner (HO6+)
no
Dovetail Connection (HSC+)
no
Continuous Beam Timber (HTM+)
yes
Biaxial-Bending for HTM+ (HTM-2)
yes
Timber Wall Diaphragms (HTW+)
no
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Framework
Framework (RSX)
yes
3D Calculation for RSX (RSX-3D)
yes
Dynamics for RSX (RSX-DY)
yes
Design of Reinforced Concrete for RSX (RSX-M-B)
yes
Design of Timer for RSX (RSX-M-H)
yes
Design of Steel for RSX (RSX-M-S)
yes
Generation of Loads with Panels for RSX (RSX-P)
yes
Stabilty Steel for RSX (RSX-ST)
yes
Girder
Continuous Beam (DLT+)
yes
Trusses Timber (FWH+)
no
Trusses Steel (FWS+)
no
Mechanically Jointed Beams (HNV+)
no
Cross Laminated Timber Beams (HTB+)
no
Reinforced Timber Beam (HTV+)
no
Crane Runway Girder (S9+)
no
FRILO Professional Steel
FUNCTIONS
Concrete
Reinforced Concrete Half Joint (B10+)
no
Crack Width Verification (B11)
no
Verification Reinforced Concrete Cross-Section (B2+)
no
Polygonal Design and Temperature Analysis for B2 (B2-POLY/TA)
no
Reinforced Concrete Column (B5+)
yes
Temperature Design for B5+ (B5-HSB)
yes
High-Strength Steel for B5+ (B5-SAS)
yes
Punching Shear Analysis (B6+)
no
Flight of Stairs (B7+)
no
Prestressed Reinforced Concrete Girder (B8+)
no
Reinforced Concrete Corbel (B9+)
no
Slope Failure Analysis (BBR+)
no
Flush Beam (BDU+)
no
Strut-and-Tie Model Reinforced Concrete (BSM+)
no
Continuous Beam Reinforced Concrete (BTM+)
yes
Biaxial-Bending for BTM+ (BTM-2)
yes
Reinforcement layout for BTM+ (BTM-BEW)
yes
Continuous Plates IAW Piper/Martens (PL5)
yes
Slabs by Finite Elements (PLT)
yes
Cross-Sectional Properties (Q2)
no
Walls by Finite Elements (SCN)
no
Steel
Antenna Mast Design (ATB+)
yes
Lateral Torsional Buckling Analysis (BTII+)
yes
Buckling Analysis (PLII+)
yes
Steel Cross-Sections (QS+)
yes
Portal Frame (S7+)
yes
Steel Chimney Design (S8+)
yes
Steel Chimney braced with ropes (S8-S)
yes
Steel Connections (SC+)
yes
Fin Plate (SFB+)
yes
Splice Connection (SLS+)
yes
Butt Plate Joint (SPS+)
yes
Verification Steel Cross-Section (SQN+)
yes
Frame Corners Steel (SRE+)
yes
Screwed Frame Corner (SRE-1 (SRE+))
yes
Welded Frame corner (SRE-2 (SRE+))
yes
Steel Bracing (ST12+)
yes
Base Flange (ST15)
yes
Steel Column Base (ST3)
yes
Steel Girder Support (ST4)
yes
Weld Design (ST5)
yes
Pocketed Steel Column Base (ST6)
yes
Continuous Beam Steel (STM+)
yes
Biaxial-Bending for STM+ (STM-2)
yes
Steel Frame (STR+)
yes
Single-span Steel Column (STS+)
yes
Single-Span Steel Beam (STT+)
yes
Stability Analysis for Steel (STX+)
yes
Typified Steel Connections (STY+)
yes
Steel Angle Connection (SWA+)
yes
Timber
2D Cross Laminated Timber Design (CLT+)
yes
Timber Column (HO1+)
yes
Verification Timber Cross-Sections (HO11+)
no
Timber Construction Details (HO12+)
no
Timber Truss Joint (HO13+)
no
Single Fastener Timber Joint (HO14+)
no
Skew Notch Joint (HO2+)
no
Timber Tension Joint (HO3+)
no
Timber Frame Corner (HO6+)
no
Dovetail Connection (HSC+)
no
Continuous Beam Timber (HTM+)
yes
Biaxial-Bending for HTM+ (HTM-2)
yes
Timber Wall Diaphragms (HTW+)
no
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Framework
Framework (RSX)
yes
3D Calculation for RSX (RSX-3D)
yes
Dynamics for RSX (RSX-DY)
yes
Design of Reinforced Concrete for RSX (RSX-M-B)
yes
Design of Timer for RSX (RSX-M-H)
yes
Design of Steel for RSX (RSX-M-S)
yes
Generation of Loads with Panels for RSX (RSX-P)
yes
Stabilty Steel for RSX (RSX-ST)
yes
Girder
Continuous Beam (DLT+)
yes
Trusses Timber (FWH+)
no
Trusses Steel (FWS+)
yes
Mechanically Jointed Beams (HNV+)
no
Cross Laminated Timber Beams (HTB+)
no
Reinforced Timber Beam (HTV+)
no
Crane Runway Girder (S9+)
yes
FRILO Professional Timber
FUNCTIONS
Concrete
Reinforced Concrete Half Joint (B10+)
no
Crack Width Verification (B11)
no
Verification Reinforced Concrete Cross-Section (B2+)
no
Polygonal Design and Temperature Analysis for B2 (B2-POLY/TA)
no
Reinforced Concrete Column (B5+)
yes
Temperature Design for B5+ (B5-HSB)
yes
High-Strength Steel for B5+ (B5-SAS)
yes
Punching Shear Analysis (B6+)
no
Flight of Stairs (B7+)
no
Prestressed Reinforced Concrete Girder (B8+)
no
Reinforced Concrete Corbel (B9+)
no
Slope Failure Analysis (BBR+)
no
Flush Beam (BDU+)
no
Strut-and-Tie Model Reinforced Concrete (BSM+)
no
Continuous Beam Reinforced Concrete (BTM+)
yes
Biaxial-Bending for BTM+ (BTM-2)
yes
Reinforcement layout for BTM+ (BTM-BEW)
yes
Continuous Plates IAW Piper/Martens (PL5)
yes
Slabs by Finite Elements (PLT)
yes
Cross-Sectional Properties (Q2)
no
Walls by Finite Elements (SCN)
no
Steel
Antenna Mast Design (ATB+)
no
Lateral Torsional Buckling Analysis (BTII+)
no
Buckling Analysis (PLII+)
no
Steel Cross-Sections (QS+)
no
Portal Frame (S7+)
no
Steel Chimney Design (S8+)
no
Steel Chimney braced with ropes (S8-S)
no
Steel Connections (SC+)
no
Fin Plate (SFB+)
no
Splice Connection (SLS+)
no
Butt Plate Joint (SPS+)
no
Verification Steel Cross-Section (SQN+)
no
Frame Corners Steel (SRE+)
no
Screwed Frame Corner (SRE-1 (SRE+))
no
Welded Frame corner (SRE-2 (SRE+))
no
Steel Bracing (ST12+)
no
Base Flange (ST15)
no
Steel Column Base (ST3)
yes
Steel Girder Support (ST4)
no
Weld Design (ST5)
no
Pocketed Steel Column Base (ST6)
no
Continuous Beam Steel (STM+)
yes
Biaxial-Bending for STM+ (STM-2)
yes
Steel Frame (STR+)
no
Single-span Steel Column (STS+)
yes
Single-Span Steel Beam (STT+)
no
Stability Analysis for Steel (STX+)
no
Typified Steel Connections (STY+)
no
Steel Angle Connection (SWA+)
no
Timber
2D Cross Laminated Timber Design (CLT+)
yes
Timber Column (HO1+)
yes
Verification Timber Cross-Sections (HO11+)
yes
Timber Construction Details (HO12+)
yes
Timber Truss Joint (HO13+)
yes
Single Fastener Timber Joint (HO14+)
yes
Skew Notch Joint (HO2+)
yes
Timber Tension Joint (HO3+)
yes
Timber Frame Corner (HO6+)
yes
Dovetail Connection (HSC+)
yes
Continuous Beam Timber (HTM+)
yes
Biaxial-Bending for HTM+ (HTM-2)
yes
Timber Wall Diaphragms (HTW+)
yes
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Framework
Framework (RSX)
yes
3D Calculation for RSX (RSX-3D)
yes
Dynamics for RSX (RSX-DY)
yes
Design of Reinforced Concrete for RSX (RSX-M-B)
yes
Design of Timer for RSX (RSX-M-H)
yes
Design of Steel for RSX (RSX-M-S)
yes
Generation of Loads with Panels for RSX (RSX-P)
yes
Stabilty Steel for RSX (RSX-ST)
yes
Girder
Continuous Beam (DLT+)
yes
Trusses Timber (FWH+)
yes
Trusses Steel (FWS+)
no
Mechanically Jointed Beams (HNV+)
yes
Cross Laminated Timber Beams (HTB+)
yes
Reinforced Timber Beam (HTV+)
yes
Crane Runway Girder (S9+)
no
FRILO Ultimate
FUNCTIONS
Concrete
Reinforced Concrete Half Joint (B10+)
yes
Crack Width Verification (B11)
yes
Verification Reinforced Concrete Cross-Section (B2+)
yes
Polygonal Design and Temperature Analysis for B2 (B2-POLY/TA)
yes
Reinforced Concrete Column (B5+)
yes
Temperature Design for B5+ (B5-HSB)
yes
High-Strength Steel for B5+ (B5-SAS)
yes
Punching Shear Analysis (B6+)
yes
Flight of Stairs (B7+)
yes
Prestressed Reinforced Concrete Girder (B8+)
yes
Reinforced Concrete Corbel (B9+)
yes
Slope Failure Analysis (BBR+)
yes
Flush Beam (BDU+)
yes
Strut-and-Tie Model Reinforced Concrete (BSM+)
yes
Continuous Beam Reinforced Concrete (BTM+)
yes
Biaxial-Bending for BTM+ (BTM-2)
yes
Reinforcement layout for BTM+ (BTM-BEW)
yes
Continuous Plates IAW Piper/Martens (PL5)
yes
Slabs by Finite Elements (PLT)
yes
Cross-Sectional Properties (Q2)
yes
Walls by Finite Elements (SCN)
yes
Steel
Antenna Mast Design (ATB+)
yes
Lateral Torsional Buckling Analysis (BTII+)
yes
Buckling Analysis (PLII+)
yes
Steel Cross-Sections (QS+)
yes
Portal Frame (S7+)
yes
Steel Chimney Design (S8+)
yes
Steel Chimney braced with ropes (S8-S)
yes
Steel Connections (SC+)
yes
Fin Plate (SFB+)
yes
Splice Connection (SLS+)
yes
Butt Plate Joint (SPS+)
yes
Verification Steel Cross-Section (SQN+)
yes
Frame Corners Steel (SRE+)
yes
Screwed Frame Corner (SRE-1 (SRE+))
yes
Welded Frame corner (SRE-2 (SRE+))
yes
Steel Bracing (ST12+)
yes
Base Flange (ST15)
yes
Steel Column Base (ST3)
yes
Steel Girder Support (ST4)
yes
Weld Design (ST5)
yes
Pocketed Steel Column Base (ST6)
yes
Continuous Beam Steel (STM+)
yes
Biaxial-Bending for STM+ (STM-2)
yes
Steel Frame (STR+)
yes
Single-span Steel Column (STS+)
yes
Single-Span Steel Beam (STT+)
yes
Stability Analysis for Steel (STX+)
yes
Typified Steel Connections (STY+)
yes
Steel Angle Connection (SWA+)
yes
Timber
2D Cross Laminated Timber Design (CLT+)
yes
Timber Column (HO1+)
yes
Verification Timber Cross-Sections (HO11+)
yes
Timber Construction Details (HO12+)
yes
Timber Truss Joint (HO13+)
yes
Single Fastener Timber Joint (HO14+)
yes
Skew Notch Joint (HO2+)
yes
Timber Tension Joint (HO3+)
yes
Timber Frame Corner (HO6+)
yes
Dovetail Connection (HSC+)
yes
Continuous Beam Timber (HTM+)
yes
Biaxial-Bending for HTM+ (HTM-2)
yes
Timber Wall Diaphragms (HTW+)
yes
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Framework
Framework (RSX)
yes
3D Calculation for RSX (RSX-3D)
yes
Dynamics for RSX (RSX-DY)
yes
Design of Reinforced Concrete for RSX (RSX-M-B)
yes
Design of Timer for RSX (RSX-M-H)
yes
Design of Steel for RSX (RSX-M-S)
yes
Generation of Loads with Panels for RSX (RSX-P)
yes
Stabilty Steel for RSX (RSX-ST)
yes
Girder
Continuous Beam (DLT+)
yes
Trusses Timber (FWH+)
yes
Trusses Steel (FWS+)
yes
Mechanically Jointed Beams (HNV+)
yes
Cross Laminated Timber Beams (HTB+)
yes
Reinforced Timber Beam (HTV+)
yes
Crane Runway Girder (S9+)
yes
FRILO Concept
FUNCTIONS
Groundworks
Standard-compliant output form (DC.ZTVK)
no
Beam on Elastic Foundation (BEB+)
no
Reinforcement layout for BEB+ (BEB-BEW)
no
Basement Wall (BWA+)
no
Earth Pressure Calculation (EDB+)
no
Pile Foundation (Pfahl+)
no
Retaining Walls (RTWX+)
yes
Soil Settlement (SBR+)
no
Gravity Wall (SGW+)
no
Cantilevered Retaining Wall (WSM+)
no
Loads
Building Model (GEO)
yes
Seismic Analysis for GEO (GEO-EB)
yes
Horizontal Load Transfer for GEO (GEO-HL)
yes
Bill of Quantities for GEO (GEO-ME)
yes
Load Compilation (LAST+)
yes
Wind and Snow Loads (FRILO.LWS+)
yes
Masonry
Basement Masonry Wall (MWK+)
no
Multi-storey Masonry Wall (MWM+)
no
Masonry Column (MWP+)
no
Masonry Design (MWX+)
no
Roof
Glued Laminated Girder (D10+)
no
Rafter Purlins (D7+)
yes
Roof Design (DACH+)
yes
Hip/Valley Rafter (DGK+)
yes
Collar Beam Roof (DKD+)
yes
Purlin and Rafter Roof (DPD+)
yes
Continuous Rafter (DSP+)
yes
Toolbox
TB-Cross-Sectional Properties (TB-AQS)
no
TB-Volume Calculation (TB-AVO)
no
TB-Half Joint Slab (TB-BAD)
no
TB-Deformation without Check (TB-BBV)
no
TB-Column Load Transfer (TB-BDS)
no
TB-Indirect Support (TB-BIA)
no
TB-Line Corbel Slab (TB-BLD)
no
TB-Line Corbel Beam (TB-BLU)
no
TB-Line Corbel Wall (TB-BLW)
no
TB-Shear Dowel (TB-BQD)
no
TB-Threaded Rod (TB-BQG)
no
TB-Frame Corner with Positive Moment (TB-BRP)
no
TB-Splitting Force (TB-BSZ)
no
TB-Partial Loaded Area (TB-BTF)
no
TB-Notch Stairs Top (TB-BTO)
no
TB-Notch Stairs Bottom (TB-BTU)
no
TB-Horizontal Beam Interface (TB-BVT)
no
TB-Deep Beam (TB-BWT)
no
TB-Fire Protection Beam (TB-BXB)
no
TB-Fire Protection Slab (TB-BXP)
no
TB-Fire Protection Ribbed Slab (TB-BXR)
no
TB-Fire Protection Wall and Column (TB-BXW)
no
TB-Approximation floor slab design (TB-GNB)
no
TB-Timber Compression (TB-HHP)
no
TB-Timber Compression, Steel Plate (TB-HHS)
no
TB-Collar Beam Connection with Connector Joint (TB-HKD)
no
TB-Collar Beam Connection with Cleat (TB-HKK)
no
TB-Collar Beam Connection with Nails (TB-HKN)
no
TB-Purlin Support with Cleat (TB-HPK)
no
TB-Rafter Support (TB-HSA)
no
TB-Rafter Base Point (TB-HSF)
no
TB-Rafter Base Point with Cleat (TB-HSK)
no
TB-Rafter Base Point with Haunched Cleat (TB-HSV)
no
TB-Sleeper Anchoring (TB-HUS)
no
TB-Würth Tension Anchors (TB-HWA)
no
TB-Infill Masonry (TB-MAF)
no
TB-Bearing Pressure (TB-MAP)
no
TB-Non-bearing Inner Partition (TB-MNW)
no
BIM
FRILO BIM-Connector® (FBC)
no
Report
Document Designer (FDD)
yes
FRILO Professional Concrete
FUNCTIONS
Groundworks
Standard-compliant output form (DC.ZTVK)
no
Beam on Elastic Foundation (BEB+)
yes
Reinforcement layout for BEB+ (BEB-BEW)
yes
Basement Wall (BWA+)
yes
Earth Pressure Calculation (EDB+)
no
Pile Foundation (Pfahl+)
no
Retaining Walls (RTWX+)
yes
Soil Settlement (SBR+)
no
Gravity Wall (SGW+)
yes
Cantilevered Retaining Wall (WSM+)
yes
Loads
Building Model (GEO)
yes
Seismic Analysis for GEO (GEO-EB)
yes
Horizontal Load Transfer for GEO (GEO-HL)
yes
Bill of Quantities for GEO (GEO-ME)
yes
Load Compilation (LAST+)
yes
Wind and Snow Loads (FRILO.LWS+)
yes
Masonry
Basement Masonry Wall (MWK+)
yes
Multi-storey Masonry Wall (MWM+)
yes
Masonry Column (MWP+)
yes
Masonry Design (MWX+)
yes
Roof
Glued Laminated Girder (D10+)
no
Rafter Purlins (D7+)
yes
Roof Design (DACH+)
yes
Hip/Valley Rafter (DGK+)
yes
Collar Beam Roof (DKD+)
yes
Purlin and Rafter Roof (DPD+)
yes
Continuous Rafter (DSP+)
yes
Toolbox
TB-Cross-Sectional Properties (TB-AQS)
yes
TB-Volume Calculation (TB-AVO)
yes
TB-Half Joint Slab (TB-BAD)
yes
TB-Deformation without Check (TB-BBV)
yes
TB-Column Load Transfer (TB-BDS)
yes
TB-Indirect Support (TB-BIA)
yes
TB-Line Corbel Slab (TB-BLD)
yes
TB-Line Corbel Beam (TB-BLU)
yes
TB-Line Corbel Wall (TB-BLW)
yes
TB-Shear Dowel (TB-BQD)
yes
TB-Threaded Rod (TB-BQG)
yes
TB-Frame Corner with Positive Moment (TB-BRP)
yes
TB-Splitting Force (TB-BSZ)
yes
TB-Partial Loaded Area (TB-BTF)
yes
TB-Notch Stairs Top (TB-BTO)
yes
TB-Notch Stairs Bottom (TB-BTU)
yes
TB-Horizontal Beam Interface (TB-BVT)
yes
TB-Deep Beam (TB-BWT)
yes
TB-Fire Protection Beam (TB-BXB)
yes
TB-Fire Protection Slab (TB-BXP)
yes
TB-Fire Protection Ribbed Slab (TB-BXR)
yes
TB-Fire Protection Wall and Column (TB-BXW)
yes
TB-Approximation floor slab design (TB-GNB)
yes
TB-Timber Compression (TB-HHP)
no
TB-Timber Compression, Steel Plate (TB-HHS)
no
TB-Collar Beam Connection with Connector Joint (TB-HKD)
no
TB-Collar Beam Connection with Cleat (TB-HKK)
no
TB-Collar Beam Connection with Nails (TB-HKN)
no
TB-Purlin Support with Cleat (TB-HPK)
no
TB-Rafter Support (TB-HSA)
no
TB-Rafter Base Point (TB-HSF)
no
TB-Rafter Base Point with Cleat (TB-HSK)
no
TB-Rafter Base Point with Haunched Cleat (TB-HSV)
no
TB-Sleeper Anchoring (TB-HUS)
no
TB-Würth Tension Anchors (TB-HWA)
no
TB-Infill Masonry (TB-MAF)
yes
TB-Bearing Pressure (TB-MAP)
yes
TB-Non-bearing Inner Partition (TB-MNW)
yes
BIM
FRILO BIM-Connector® (FBC)
yes
Report
Document Designer (FDD)
yes
FRILO Professional Steel
FUNCTIONS
Groundworks
Standard-compliant output form (DC.ZTVK)
no
Beam on Elastic Foundation (BEB+)
no
Reinforcement layout for BEB+ (BEB-BEW)
no
Basement Wall (BWA+)
no
Earth Pressure Calculation (EDB+)
no
Pile Foundation (Pfahl+)
no
Retaining Walls (RTWX+)
yes
Soil Settlement (SBR+)
no
Gravity Wall (SGW+)
no
Cantilevered Retaining Wall (WSM+)
no
Loads
Building Model (GEO)
yes
Seismic Analysis for GEO (GEO-EB)
yes
Horizontal Load Transfer for GEO (GEO-HL)
yes
Bill of Quantities for GEO (GEO-ME)
yes
Load Compilation (LAST+)
yes
Wind and Snow Loads (FRILO.LWS+)
yes
Masonry
Basement Masonry Wall (MWK+)
no
Multi-storey Masonry Wall (MWM+)
no
Masonry Column (MWP+)
no
Masonry Design (MWX+)
no
Roof
Glued Laminated Girder (D10+)
no
Rafter Purlins (D7+)
yes
Roof Design (DACH+)
yes
Hip/Valley Rafter (DGK+)
yes
Collar Beam Roof (DKD+)
yes
Purlin and Rafter Roof (DPD+)
yes
Continuous Rafter (DSP+)
yes
Toolbox
TB-Cross-Sectional Properties (TB-AQS)
yes
TB-Volume Calculation (TB-AVO)
yes
TB-Half Joint Slab (TB-BAD)
no
TB-Deformation without Check (TB-BBV)
no
TB-Column Load Transfer (TB-BDS)
no
TB-Indirect Support (TB-BIA)
no
TB-Line Corbel Slab (TB-BLD)
no
TB-Line Corbel Beam (TB-BLU)
no
TB-Line Corbel Wall (TB-BLW)
no
TB-Shear Dowel (TB-BQD)
no
TB-Threaded Rod (TB-BQG)
no
TB-Frame Corner with Positive Moment (TB-BRP)
no
TB-Splitting Force (TB-BSZ)
no
TB-Partial Loaded Area (TB-BTF)
no
TB-Notch Stairs Top (TB-BTO)
no
TB-Notch Stairs Bottom (TB-BTU)
no
TB-Horizontal Beam Interface (TB-BVT)
no
TB-Deep Beam (TB-BWT)
no
TB-Fire Protection Beam (TB-BXB)
no
TB-Fire Protection Slab (TB-BXP)
no
TB-Fire Protection Ribbed Slab (TB-BXR)
no
TB-Fire Protection Wall and Column (TB-BXW)
no
TB-Approximation floor slab design (TB-GNB)
no
TB-Timber Compression (TB-HHP)
no
TB-Timber Compression, Steel Plate (TB-HHS)
no
TB-Collar Beam Connection with Connector Joint (TB-HKD)
no
TB-Collar Beam Connection with Cleat (TB-HKK)
no
TB-Collar Beam Connection with Nails (TB-HKN)
no
TB-Purlin Support with Cleat (TB-HPK)
no
TB-Rafter Support (TB-HSA)
no
TB-Rafter Base Point (TB-HSF)
no
TB-Rafter Base Point with Cleat (TB-HSK)
no
TB-Rafter Base Point with Haunched Cleat (TB-HSV)
no
TB-Sleeper Anchoring (TB-HUS)
no
TB-Würth Tension Anchors (TB-HWA)
no
TB-Infill Masonry (TB-MAF)
no
TB-Bearing Pressure (TB-MAP)
no
TB-Non-bearing Inner Partition (TB-MNW)
no
BIM
FRILO BIM-Connector® (FBC)
yes
Report
Document Designer (FDD)
yes
FRILO Professional Timber
FUNCTIONS
Groundworks
Standard-compliant output form (DC.ZTVK)
no
Beam on Elastic Foundation (BEB+)
no
Reinforcement layout for BEB+ (BEB-BEW)
no
Basement Wall (BWA+)
no
Earth Pressure Calculation (EDB+)
no
Pile Foundation (Pfahl+)
no
Retaining Walls (RTWX+)
yes
Soil Settlement (SBR+)
no
Gravity Wall (SGW+)
no
Cantilevered Retaining Wall (WSM+)
no
Loads
Building Model (GEO)
yes
Seismic Analysis for GEO (GEO-EB)
yes
Horizontal Load Transfer for GEO (GEO-HL)
yes
Bill of Quantities for GEO (GEO-ME)
yes
Load Compilation (LAST+)
yes
Wind and Snow Loads (FRILO.LWS+)
yes
Masonry
Basement Masonry Wall (MWK+)
no
Multi-storey Masonry Wall (MWM+)
no
Masonry Column (MWP+)
no
Masonry Design (MWX+)
no
Roof
Glued Laminated Girder (D10+)
yes
Rafter Purlins (D7+)
yes
Roof Design (DACH+)
yes
Hip/Valley Rafter (DGK+)
yes
Collar Beam Roof (DKD+)
yes
Purlin and Rafter Roof (DPD+)
yes
Continuous Rafter (DSP+)
yes
Toolbox
TB-Cross-Sectional Properties (TB-AQS)
yes
TB-Volume Calculation (TB-AVO)
yes
TB-Half Joint Slab (TB-BAD)
no
TB-Deformation without Check (TB-BBV)
no
TB-Column Load Transfer (TB-BDS)
no
TB-Indirect Support (TB-BIA)
no
TB-Line Corbel Slab (TB-BLD)
no
TB-Line Corbel Beam (TB-BLU)
no
TB-Line Corbel Wall (TB-BLW)
no
TB-Shear Dowel (TB-BQD)
no
TB-Threaded Rod (TB-BQG)
no
TB-Frame Corner with Positive Moment (TB-BRP)
no
TB-Splitting Force (TB-BSZ)
no
TB-Partial Loaded Area (TB-BTF)
no
TB-Notch Stairs Top (TB-BTO)
no
TB-Notch Stairs Bottom (TB-BTU)
no
TB-Horizontal Beam Interface (TB-BVT)
no
TB-Deep Beam (TB-BWT)
no
TB-Fire Protection Beam (TB-BXB)
no
TB-Fire Protection Slab (TB-BXP)
no
TB-Fire Protection Ribbed Slab (TB-BXR)
no
TB-Fire Protection Wall and Column (TB-BXW)
no
TB-Approximation floor slab design (TB-GNB)
no
TB-Timber Compression (TB-HHP)
yes
TB-Timber Compression, Steel Plate (TB-HHS)
yes
TB-Collar Beam Connection with Connector Joint (TB-HKD)
yes
TB-Collar Beam Connection with Cleat (TB-HKK)
yes
TB-Collar Beam Connection with Nails (TB-HKN)
yes
TB-Purlin Support with Cleat (TB-HPK)
yes
TB-Rafter Support (TB-HSA)
yes
TB-Rafter Base Point (TB-HSF)
yes
TB-Rafter Base Point with Cleat (TB-HSK)
yes
TB-Rafter Base Point with Haunched Cleat (TB-HSV)
yes
TB-Sleeper Anchoring (TB-HUS)
yes
TB-Würth Tension Anchors (TB-HWA)
yes
TB-Infill Masonry (TB-MAF)
no
TB-Bearing Pressure (TB-MAP)
no
TB-Non-bearing Inner Partition (TB-MNW)
no
BIM
FRILO BIM-Connector® (FBC)
yes
Report
Document Designer (FDD)
yes
FRILO Ultimate
FUNCTIONS
Groundworks
Standard-compliant output form (DC.ZTVK)
yes
Beam on Elastic Foundation (BEB+)
yes
Reinforcement layout for BEB+ (BEB-BEW)
yes
Basement Wall (BWA+)
yes
Earth Pressure Calculation (EDB+)
yes
Pile Foundation (Pfahl+)
yes
Retaining Walls (RTWX+)
yes
Soil Settlement (SBR+)
yes
Gravity Wall (SGW+)
yes
Cantilevered Retaining Wall (WSM+)
yes
Loads
Building Model (GEO)
yes
Seismic Analysis for GEO (GEO-EB)
yes
Horizontal Load Transfer for GEO (GEO-HL)
yes
Bill of Quantities for GEO (GEO-ME)
yes
Load Compilation (LAST+)
yes
Wind and Snow Loads (FRILO.LWS+)
yes
Masonry
Basement Masonry Wall (MWK+)
yes
Multi-storey Masonry Wall (MWM+)
yes
Masonry Column (MWP+)
yes
Masonry Design (MWX+)
yes
Roof
Glued Laminated Girder (D10+)
yes
Rafter Purlins (D7+)
yes
Roof Design (DACH+)
yes
Hip/Valley Rafter (DGK+)
yes
Collar Beam Roof (DKD+)
yes
Purlin and Rafter Roof (DPD+)
yes
Continuous Rafter (DSP+)
yes
Toolbox
TB-Cross-Sectional Properties (TB-AQS)
yes
TB-Volume Calculation (TB-AVO)
yes
TB-Half Joint Slab (TB-BAD)
yes
TB-Deformation without Check (TB-BBV)
yes
TB-Column Load Transfer (TB-BDS)
yes
TB-Indirect Support (TB-BIA)
yes
TB-Line Corbel Slab (TB-BLD)
yes
TB-Line Corbel Beam (TB-BLU)
yes
TB-Line Corbel Wall (TB-BLW)
yes
TB-Shear Dowel (TB-BQD)
yes
TB-Threaded Rod (TB-BQG)
yes
TB-Frame Corner with Positive Moment (TB-BRP)
yes
TB-Splitting Force (TB-BSZ)
yes
TB-Partial Loaded Area (TB-BTF)
yes
TB-Notch Stairs Top (TB-BTO)
yes
TB-Notch Stairs Bottom (TB-BTU)
yes
TB-Horizontal Beam Interface (TB-BVT)
yes
TB-Deep Beam (TB-BWT)
yes
TB-Fire Protection Beam (TB-BXB)
yes
TB-Fire Protection Slab (TB-BXP)
yes
TB-Fire Protection Ribbed Slab (TB-BXR)
yes
TB-Fire Protection Wall and Column (TB-BXW)
yes
TB-Approximation floor slab design (TB-GNB)
yes
TB-Timber Compression (TB-HHP)
yes
TB-Timber Compression, Steel Plate (TB-HHS)
yes
TB-Collar Beam Connection with Connector Joint (TB-HKD)
yes
TB-Collar Beam Connection with Cleat (TB-HKK)
yes
TB-Collar Beam Connection with Nails (TB-HKN)
yes
TB-Purlin Support with Cleat (TB-HPK)
yes
TB-Rafter Support (TB-HSA)
yes
TB-Rafter Base Point (TB-HSF)
yes
TB-Rafter Base Point with Cleat (TB-HSK)
yes
TB-Rafter Base Point with Haunched Cleat (TB-HSV)
yes
TB-Sleeper Anchoring (TB-HUS)
yes
TB-Würth Tension Anchors (TB-HWA)
yes
TB-Infill Masonry (TB-MAF)
yes
TB-Bearing Pressure (TB-MAP)
yes
TB-Non-bearing Inner Partition (TB-MNW)
yes
BIM
FRILO BIM-Connector® (FBC)
yes
Report
Document Designer (FDD)
yes