Soil Mechanics
FUNCTIONS
Foundation
Footings (DC.Fund)
no
Restrained Pylon Footings (DC.Fund-Mast)
no
Safety against Ground Failure (DC.Grub)
no
Isolated Foundation (FD+)
no
Pad Foundation (FDB+)
no
Reinforcement layout for foundations (FD-BEW)
no
Mast Foundation (FDM+)
no
FD+ Professional (FDPro)
no
Reinforced Raft Foundation (FDR+)
no
Strip Foundation (FDS+)
no
Foundations (FDX+)
no
Bearing Resistance Failure (GBR+)
no
Concrete
Slope Failure Analysis (BBR+)
no
Groundworks
Groundwater Lowering (DC-Dewatering)
no
Calculation of Construction Pit Walls (DC-Pit)
no
Design of Construction Pit Walls (DC-Pit/Dimensioning)
no
Reinforcement of Construction Pit Walls (DC-Pit Dimensioning/Reinforcement)
no
Slope and Base Failure (DC-Slope)
no
Gabion Walls (DC-Gabion)
no
Reinforced Soil with Geosynthetics (DC-Geotex)
no
Integrated Foundation Analysis (DC-Integra)
no
Integrated Foundation Analysis/3D Design (DC-Integra/3D)
no
Anchor Collision Check (DC-Integra 3D/Anchor)
no
Pipework (DC-Integra 3D/Pipework)
no
Excavation Volume (DC-Integra 3D/Volume)
no
Diaphragm Wall Lamellae (DC-Lamella)
no
Soil Nailing (DC-Nail)
no
Analysis of Piles (DC-Pile)
no
Piles in Slopes (DC-Pile/Noise Barrier)
no
Combined Pile-Raft Foundations (DC-Pilegroup pro)
no
Serviceability Verifications (DC-Crack)
no
Settlement Analysis (DC-Settle)
no
Infiltration Installations (DC-Infilt)
no
Treatment of Rainwater (DC-Infilt/Rain)
no
Building Underpinning & Gravity Walls (DC-Underpinning)
no
Optimisation of Wall Width and Anchor Forces (DC-Underpinning/Optimisation)
no
Vibro-Compaction (DC-Vibro)
no
Cantilevered Retaining Walls (DC-Cantilever)
no
Standard-compliant output form (DC-ZTVK)
yes
Beam on Elastic Foundation (BEB+)
no
Reinforcement layout for BEB+ (BEB-BEW)
no
Basement Wall (BWA+)
no
Earth Pressure Calculation (EDB+)
no
Pile Foundation (Pfahl+)
no
Soil Settlement (SBR+)
no
Gravity Wall (SGW+)
no
Cantilevered Retaining Wall (WSM+)
no
Report
Document Designer (FDD)
yes
Soil Mechanics
Representation of Bore Profiles (DCBORE)
yes
Import of Bore Profile Data (DCBORE-ASCII)
yes
Line and Bar Charts (DCBORE-Data logger)
yes
Extraction Rate of Geothermal Wells (DCBORE-Geotherm)
yes
Bore Data in SEP Format (DCBORE-SEP)
yes
Layer Specification DIN 4022 p. 2 (DCBORE-LS2)
yes
Layer Specification DIN 4022 p. 3 (DCBORE-LS3)
yes
Chemical Investigation of Contaminated Sites (DCCHEM)
yes
Compression Tests (DCPRESS)
yes
Permeability Tests (DCPERM)
yes
Borehole Management (DCGIS)
yes
Loss on Ignition (DCGLOW)
yes
Lime Content (DCLIME)
yes
Consistency Limits (DCCONS)
yes
Integrated Soil Mechanics (DCLABTEGRA)
yes
Plate Load Tests (DCLOAD)
yes
Import of Plate Load Test Data (DCLOAD-Staßentest)
yes
Proctor Tests (DCPROC)
yes
Pump Tests (DCPUMP)
yes
Pump Test Evaluation (DCPUMP-Evaluation)
yes
Data Import from Measuring Instruments (DCPUMP-Data logger)
yes
Dynamic Probing (DCPROBE)
yes
Import of Dynamic Probing Data (DCPROBE-ASCII)
yes
Density and Water Content (DCDENS)
yes
Geological Sections with Site Maps (DCSECTION pro)
yes
Shear Strength Tests (DCSHEAR)
yes
Triaxial Shear Tests (DCSHEAR-3D)
yes
Sieve and Sedimentation Tests (DCSIEVE)
yes
Frost Resistance Verification (DCSIEVE-ZTVE)
yes
Cone Penetration Tests (DCCONE)
yes
Import of Cone Penetration Test Data (DCCONE-ASCII)
yes
Representation of BDP and SPT (DCBORE-STAN)
yes
FRILO Geo Concept
FUNCTIONS
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Concrete
Slope Failure Analysis (BBR+)
no
Groundworks
Groundwater Lowering (DC-Dewatering)
no
Calculation of Construction Pit Walls (DC-Pit)
no
Design of Construction Pit Walls (DC-Pit/Dimensioning)
no
Reinforcement of Construction Pit Walls (DC-Pit Dimensioning/Reinforcement)
no
Slope and Base Failure (DC-Slope)
yes
Gabion Walls (DC-Gabion)
no
Reinforced Soil with Geosynthetics (DC-Geotex)
no
Integrated Foundation Analysis (DC-Integra)
no
Integrated Foundation Analysis/3D Design (DC-Integra/3D)
no
Anchor Collision Check (DC-Integra 3D/Anchor)
no
Pipework (DC-Integra 3D/Pipework)
no
Excavation Volume (DC-Integra 3D/Volume)
no
Diaphragm Wall Lamellae (DC-Lamella)
no
Soil Nailing (DC-Nail)
no
Analysis of Piles (DC-Pile)
yes
Piles in Slopes (DC-Pile/Noise Barrier)
yes
Combined Pile-Raft Foundations (DC-Pilegroup pro)
yes
Serviceability Verifications (DC-Crack)
no
Settlement Analysis (DC-Settle)
yes
Infiltration Installations (DC-Infilt)
no
Treatment of Rainwater (DC-Infilt/Rain)
no
Building Underpinning & Gravity Walls (DC-Underpinning)
no
Optimisation of Wall Width and Anchor Forces (DC-Underpinning/Optimisation)
no
Vibro-Compaction (DC-Vibro)
yes
Cantilevered Retaining Walls (DC-Cantilever)
no
Standard-compliant output form (DC-ZTVK)
yes
Beam on Elastic Foundation (BEB+)
yes
Reinforcement layout for BEB+ (BEB-BEW)
yes
Basement Wall (BWA+)
no
Earth Pressure Calculation (EDB+)
no
Pile Foundation (Pfahl+)
yes
Soil Settlement (SBR+)
yes
Gravity Wall (SGW+)
no
Cantilevered Retaining Wall (WSM+)
no
Report
Document Designer (FDD)
yes
Soil Mechanics
Representation of Bore Profiles (DCBORE)
no
Import of Bore Profile Data (DCBORE-ASCII)
no
Line and Bar Charts (DCBORE-Data logger)
no
Extraction Rate of Geothermal Wells (DCBORE-Geotherm)
no
Bore Data in SEP Format (DCBORE-SEP)
no
Layer Specification DIN 4022 p. 2 (DCBORE-LS2)
no
Layer Specification DIN 4022 p. 3 (DCBORE-LS3)
no
Chemical Investigation of Contaminated Sites (DCCHEM)
no
Compression Tests (DCPRESS)
no
Permeability Tests (DCPERM)
no
Borehole Management (DCGIS)
no
Loss on Ignition (DCGLOW)
no
Lime Content (DCLIME)
no
Consistency Limits (DCCONS)
no
Integrated Soil Mechanics (DCLABTEGRA)
no
Plate Load Tests (DCLOAD)
no
Import of Plate Load Test Data (DCLOAD-Staßentest)
no
Proctor Tests (DCPROC)
no
Pump Tests (DCPUMP)
no
Pump Test Evaluation (DCPUMP-Evaluation)
no
Data Import from Measuring Instruments (DCPUMP-Data logger)
no
Dynamic Probing (DCPROBE)
no
Import of Dynamic Probing Data (DCPROBE-ASCII)
no
Density and Water Content (DCDENS)
no
Geological Sections with Site Maps (DCSECTION pro)
no
Shear Strength Tests (DCSHEAR)
no
Triaxial Shear Tests (DCSHEAR-3D)
no
Sieve and Sedimentation Tests (DCSIEVE)
no
Frost Resistance Verification (DCSIEVE-ZTVE)
no
Cone Penetration Tests (DCCONE)
no
Import of Cone Penetration Test Data (DCCONE-ASCII)
no
Representation of BDP and SPT (DCBORE-STAN)
no
FRILO Geo Professional Pit
FUNCTIONS
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Concrete
Slope Failure Analysis (BBR+)
no
Groundworks
Groundwater Lowering (DC-Dewatering)
no
Calculation of Construction Pit Walls (DC-Pit)
yes
Design of Construction Pit Walls (DC-Pit/Dimensioning)
yes
Reinforcement of Construction Pit Walls (DC-Pit Dimensioning/Reinforcement)
yes
Slope and Base Failure (DC-Slope)
yes
Gabion Walls (DC-Gabion)
no
Reinforced Soil with Geosynthetics (DC-Geotex)
no
Integrated Foundation Analysis (DC-Integra)
yes
Integrated Foundation Analysis/3D Design (DC-Integra/3D)
yes
Anchor Collision Check (DC-Integra 3D/Anchor)
yes
Pipework (DC-Integra 3D/Pipework)
yes
Excavation Volume (DC-Integra 3D/Volume)
yes
Diaphragm Wall Lamellae (DC-Lamella)
no
Soil Nailing (DC-Nail)
no
Analysis of Piles (DC-Pile)
yes
Piles in Slopes (DC-Pile/Noise Barrier)
yes
Combined Pile-Raft Foundations (DC-Pilegroup pro)
yes
Serviceability Verifications (DC-Crack)
yes
Settlement Analysis (DC-Settle)
yes
Infiltration Installations (DC-Infilt)
no
Treatment of Rainwater (DC-Infilt/Rain)
no
Building Underpinning & Gravity Walls (DC-Underpinning)
no
Optimisation of Wall Width and Anchor Forces (DC-Underpinning/Optimisation)
no
Vibro-Compaction (DC-Vibro)
yes
Cantilevered Retaining Walls (DC-Cantilever)
no
Standard-compliant output form (DC-ZTVK)
yes
Beam on Elastic Foundation (BEB+)
yes
Reinforcement layout for BEB+ (BEB-BEW)
yes
Basement Wall (BWA+)
no
Earth Pressure Calculation (EDB+)
no
Pile Foundation (Pfahl+)
yes
Soil Settlement (SBR+)
yes
Gravity Wall (SGW+)
no
Cantilevered Retaining Wall (WSM+)
no
Report
Document Designer (FDD)
yes
Soil Mechanics
Representation of Bore Profiles (DCBORE)
no
Import of Bore Profile Data (DCBORE-ASCII)
no
Line and Bar Charts (DCBORE-Data logger)
no
Extraction Rate of Geothermal Wells (DCBORE-Geotherm)
no
Bore Data in SEP Format (DCBORE-SEP)
no
Layer Specification DIN 4022 p. 2 (DCBORE-LS2)
no
Layer Specification DIN 4022 p. 3 (DCBORE-LS3)
no
Chemical Investigation of Contaminated Sites (DCCHEM)
no
Compression Tests (DCPRESS)
no
Permeability Tests (DCPERM)
no
Borehole Management (DCGIS)
no
Loss on Ignition (DCGLOW)
no
Lime Content (DCLIME)
no
Consistency Limits (DCCONS)
no
Integrated Soil Mechanics (DCLABTEGRA)
no
Plate Load Tests (DCLOAD)
no
Import of Plate Load Test Data (DCLOAD-Staßentest)
no
Proctor Tests (DCPROC)
no
Pump Tests (DCPUMP)
no
Pump Test Evaluation (DCPUMP-Evaluation)
no
Data Import from Measuring Instruments (DCPUMP-Data logger)
no
Dynamic Probing (DCPROBE)
no
Import of Dynamic Probing Data (DCPROBE-ASCII)
no
Density and Water Content (DCDENS)
no
Geological Sections with Site Maps (DCSECTION pro)
no
Shear Strength Tests (DCSHEAR)
no
Triaxial Shear Tests (DCSHEAR-3D)
no
Sieve and Sedimentation Tests (DCSIEVE)
no
Frost Resistance Verification (DCSIEVE-ZTVE)
no
Cone Penetration Tests (DCCONE)
no
Import of Cone Penetration Test Data (DCCONE-ASCII)
no
Representation of BDP and SPT (DCBORE-STAN)
no
FRILO Geo Professional Retaining
FUNCTIONS
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Concrete
Slope Failure Analysis (BBR+)
no
Groundworks
Groundwater Lowering (DC-Dewatering)
no
Calculation of Construction Pit Walls (DC-Pit)
no
Design of Construction Pit Walls (DC-Pit/Dimensioning)
no
Reinforcement of Construction Pit Walls (DC-Pit Dimensioning/Reinforcement)
no
Slope and Base Failure (DC-Slope)
yes
Gabion Walls (DC-Gabion)
yes
Reinforced Soil with Geosynthetics (DC-Geotex)
yes
Integrated Foundation Analysis (DC-Integra)
no
Integrated Foundation Analysis/3D Design (DC-Integra/3D)
no
Anchor Collision Check (DC-Integra 3D/Anchor)
no
Pipework (DC-Integra 3D/Pipework)
no
Excavation Volume (DC-Integra 3D/Volume)
no
Diaphragm Wall Lamellae (DC-Lamella)
no
Soil Nailing (DC-Nail)
yes
Analysis of Piles (DC-Pile)
yes
Piles in Slopes (DC-Pile/Noise Barrier)
yes
Combined Pile-Raft Foundations (DC-Pilegroup pro)
yes
Serviceability Verifications (DC-Crack)
no
Settlement Analysis (DC-Settle)
yes
Infiltration Installations (DC-Infilt)
no
Treatment of Rainwater (DC-Infilt/Rain)
no
Building Underpinning & Gravity Walls (DC-Underpinning)
yes
Optimisation of Wall Width and Anchor Forces (DC-Underpinning/Optimisation)
yes
Vibro-Compaction (DC-Vibro)
yes
Cantilevered Retaining Walls (DC-Cantilever)
yes
Standard-compliant output form (DC-ZTVK)
yes
Beam on Elastic Foundation (BEB+)
yes
Reinforcement layout for BEB+ (BEB-BEW)
yes
Basement Wall (BWA+)
no
Earth Pressure Calculation (EDB+)
no
Pile Foundation (Pfahl+)
yes
Soil Settlement (SBR+)
yes
Gravity Wall (SGW+)
yes
Cantilevered Retaining Wall (WSM+)
yes
Report
Document Designer (FDD)
yes
Soil Mechanics
Representation of Bore Profiles (DCBORE)
no
Import of Bore Profile Data (DCBORE-ASCII)
no
Line and Bar Charts (DCBORE-Data logger)
no
Extraction Rate of Geothermal Wells (DCBORE-Geotherm)
no
Bore Data in SEP Format (DCBORE-SEP)
no
Layer Specification DIN 4022 p. 2 (DCBORE-LS2)
no
Layer Specification DIN 4022 p. 3 (DCBORE-LS3)
no
Chemical Investigation of Contaminated Sites (DCCHEM)
no
Compression Tests (DCPRESS)
no
Permeability Tests (DCPERM)
no
Borehole Management (DCGIS)
no
Loss on Ignition (DCGLOW)
no
Lime Content (DCLIME)
no
Consistency Limits (DCCONS)
no
Integrated Soil Mechanics (DCLABTEGRA)
no
Plate Load Tests (DCLOAD)
no
Import of Plate Load Test Data (DCLOAD-Staßentest)
no
Proctor Tests (DCPROC)
no
Pump Tests (DCPUMP)
no
Pump Test Evaluation (DCPUMP-Evaluation)
no
Data Import from Measuring Instruments (DCPUMP-Data logger)
no
Dynamic Probing (DCPROBE)
no
Import of Dynamic Probing Data (DCPROBE-ASCII)
no
Density and Water Content (DCDENS)
no
Geological Sections with Site Maps (DCSECTION pro)
no
Shear Strength Tests (DCSHEAR)
no
Triaxial Shear Tests (DCSHEAR-3D)
no
Sieve and Sedimentation Tests (DCSIEVE)
no
Frost Resistance Verification (DCSIEVE-ZTVE)
no
Cone Penetration Tests (DCCONE)
no
Import of Cone Penetration Test Data (DCCONE-ASCII)
no
Representation of BDP and SPT (DCBORE-STAN)
no
FRILO Geo Ultimate
FUNCTIONS
Foundation
Footings (DC.Fund)
yes
Restrained Pylon Footings (DC.Fund-Mast)
yes
Safety against Ground Failure (DC.Grub)
yes
Isolated Foundation (FD+)
yes
Pad Foundation (FDB+)
yes
Reinforcement layout for foundations (FD-BEW)
yes
Mast Foundation (FDM+)
yes
FD+ Professional (FDPro)
yes
Reinforced Raft Foundation (FDR+)
yes
Strip Foundation (FDS+)
yes
Foundations (FDX+)
yes
Bearing Resistance Failure (GBR+)
yes
Concrete
Slope Failure Analysis (BBR+)
yes
Groundworks
Groundwater Lowering (DC-Dewatering)
yes
Calculation of Construction Pit Walls (DC-Pit)
yes
Design of Construction Pit Walls (DC-Pit/Dimensioning)
yes
Reinforcement of Construction Pit Walls (DC-Pit Dimensioning/Reinforcement)
yes
Slope and Base Failure (DC-Slope)
yes
Gabion Walls (DC-Gabion)
yes
Reinforced Soil with Geosynthetics (DC-Geotex)
yes
Integrated Foundation Analysis (DC-Integra)
yes
Integrated Foundation Analysis/3D Design (DC-Integra/3D)
yes
Anchor Collision Check (DC-Integra 3D/Anchor)
yes
Pipework (DC-Integra 3D/Pipework)
yes
Excavation Volume (DC-Integra 3D/Volume)
yes
Diaphragm Wall Lamellae (DC-Lamella)
yes
Soil Nailing (DC-Nail)
yes
Analysis of Piles (DC-Pile)
yes
Piles in Slopes (DC-Pile/Noise Barrier)
yes
Combined Pile-Raft Foundations (DC-Pilegroup pro)
yes
Serviceability Verifications (DC-Crack)
yes
Settlement Analysis (DC-Settle)
yes
Infiltration Installations (DC-Infilt)
yes
Treatment of Rainwater (DC-Infilt/Rain)
yes
Building Underpinning & Gravity Walls (DC-Underpinning)
yes
Optimisation of Wall Width and Anchor Forces (DC-Underpinning/Optimisation)
yes
Vibro-Compaction (DC-Vibro)
yes
Cantilevered Retaining Walls (DC-Cantilever)
yes
Standard-compliant output form (DC-ZTVK)
yes
Beam on Elastic Foundation (BEB+)
yes
Reinforcement layout for BEB+ (BEB-BEW)
yes
Basement Wall (BWA+)
yes
Earth Pressure Calculation (EDB+)
yes
Pile Foundation (Pfahl+)
yes
Soil Settlement (SBR+)
yes
Gravity Wall (SGW+)
yes
Cantilevered Retaining Wall (WSM+)
yes
Report
Document Designer (FDD)
yes
Soil Mechanics
Representation of Bore Profiles (DCBORE)
no
Import of Bore Profile Data (DCBORE-ASCII)
no
Line and Bar Charts (DCBORE-Data logger)
no
Extraction Rate of Geothermal Wells (DCBORE-Geotherm)
no
Bore Data in SEP Format (DCBORE-SEP)
no
Layer Specification DIN 4022 p. 2 (DCBORE-LS2)
no
Layer Specification DIN 4022 p. 3 (DCBORE-LS3)
no
Chemical Investigation of Contaminated Sites (DCCHEM)
no
Compression Tests (DCPRESS)
no
Permeability Tests (DCPERM)
no
Borehole Management (DCGIS)
no
Loss on Ignition (DCGLOW)
no
Lime Content (DCLIME)
no
Consistency Limits (DCCONS)
no
Integrated Soil Mechanics (DCLABTEGRA)
no
Plate Load Tests (DCLOAD)
no
Import of Plate Load Test Data (DCLOAD-Staßentest)
no
Proctor Tests (DCPROC)
no
Pump Tests (DCPUMP)
no
Pump Test Evaluation (DCPUMP-Evaluation)
no
Data Import from Measuring Instruments (DCPUMP-Data logger)
no
Dynamic Probing (DCPROBE)
no
Import of Dynamic Probing Data (DCPROBE-ASCII)
no
Density and Water Content (DCDENS)
no
Geological Sections with Site Maps (DCSECTION pro)
no
Shear Strength Tests (DCSHEAR)
no
Triaxial Shear Tests (DCSHEAR-3D)
no
Sieve and Sedimentation Tests (DCSIEVE)
no
Frost Resistance Verification (DCSIEVE-ZTVE)
no
Cone Penetration Tests (DCCONE)
no
Import of Cone Penetration Test Data (DCCONE-ASCII)
no
Representation of BDP and SPT (DCBORE-STAN)
no